Low-Cost Fleet Tracker
G610 is designed for service providers, integrators, and enterprise customers to enhance mobile resources and improve their dispatch system. The G610 is a dependable LTE CAT-1 and 2G tracking device, delivering the key features fulfilling the most demanding applications: fleet management, insurance telematics, dispatch, vehicle location and recovery, and more.
- LTE CAT-1 and 2G Worldwide Connectivity
- Multiple Inputs and Outputs
- 1-Wire® Interface
- 200 Hardware-based Geo-Fences
- Driving Behavior
- Crash Data up to 100Hz with 4Hz GPS update
GeneralCommunication Modes :
LTE/GPRS and TCP/UDP/SMS
Location Technology :
56 Channels GNSS
Operating Voltage :
12 and 24 volt vehicle systems
ElectricalOperating Voltage :
8-40V DC operational for 12V & 24V
Vehicle support per SAE J1455
Power Consumption :
3mA 12V (Sleep)
60mA 12V (Power Save)
120mA 12V (Active Tracking)
Backup Battery :
LI-PO 220mAh (Optional)
Battery Recharging Range is 0 to +45ºC
GPSLocation Technology :
Multi GNSS Engine
GPS/Glonass/Galileo/BeiDou
GPS/QZSS L1 C/A, Glonass L10F
BeiBou B1, Galileo E1 B/C
SBAS, WAAS, EGNOS, MSAS, GAGAN
Concurrent GNSS : 3
Accuracy : SBAS 2.0m Open Sky
Tracking Sensitivity : -162dBm
Antenna : Patch internal
Assist GPS : Supported
Physical Dimensions :
80(L) X 52(W) X 26(H)Mm
Weight :
80g (Without Battery)
CellularData Support :
TCP, UDP, SMS
LTE CAT-1 :
B1/2/3/4/5/7/8/12/13/17/18/19
20/25/26/28/66
GSM/3G:
850/900/1800/1900 Mhz
LTE Power :
Class 5 (20dBm)
GSM/GPRS Fallback :
GPRS Class 10
LTE Data Rate :
5Mbps UL/10Mbps DL
SIM Card :
1.8/3.3 V
Environmental Operating Temperature :
-40 ~ +85°C (without Backup Battery)
-10 ~ +60°C (with Backup Battery)
Humidity :
95%RH @ 50°C non-condensing
Shock & Vibration :
U.S. Military Standards 202G and 810F, SAE
J1455
EMC/EMI :
SAE J1113; FCC–Part 15B
RoHS : Compliant
Input/OutputsDigital Inputs :
2 Digital inputs
Ignition Sense :
One dedicated wire for Ignition
Programmable Input :
One configurable input to a negative trigger
digital input or analog input
Digital Output :
Two digital outputs, open drain, 300mA
drive current max
Latched Digital O/P :
One digital output with internal latch circuit, open drain, 150mA drive max
1-Wire Solution :
1 wire interface (Driver ID)
BLE 4.2:
for Wireless Sensors
Status LEDs :
GPS, Cellular, Power
Connectors, SIM Card Access
Connector Type :
10 Pin Molex
Mini USB :
1 Micro USB (configuration/debug)
GPS Antenna: Internal
Cellular Antenna: Internal
SIM Card: Internal (4FF)
On BoardCPU :
ARM Cortex M3
Flash Memory :
4Mbit (8000 records)
3D Accelerometer
MountingTie Wrap, Velcro or adhesive
- + Features
-
- + Specifications
-
GeneralCommunication Modes :
LTE/GPRS and TCP/UDP/SMS
Location Technology :
56 Channels GNSS
Operating Voltage :
12 and 24 volt vehicle systemsElectricalOperating Voltage :
8-40V DC operational for 12V & 24V
Vehicle support per SAE J1455
Power Consumption :
3mA 12V (Sleep)
60mA 12V (Power Save)
120mA 12V (Active Tracking)
Backup Battery :
LI-PO 220mAh (Optional)
Battery Recharging Range is 0 to +45ºCGPSLocation Technology :
Multi GNSS Engine
GPS/Glonass/Galileo/BeiDou
GPS/QZSS L1 C/A, Glonass L10F
BeiBou B1, Galileo E1 B/C
SBAS, WAAS, EGNOS, MSAS, GAGAN
Concurrent GNSS : 3
Accuracy : SBAS 2.0m Open Sky
Tracking Sensitivity : -162dBm
Antenna : Patch internal
Assist GPS : SupportedPhysical Dimensions :
80(L) X 52(W) X 26(H)Mm
Weight :
80g (Without Battery)CellularData Support :
TCP, UDP, SMS
LTE CAT-1 :
B1/2/3/4/5/7/8/12/13/17/18/19
20/25/26/28/66
GSM/3G:
850/900/1800/1900 Mhz
LTE Power :
Class 5 (20dBm)
GSM/GPRS Fallback :
GPRS Class 10
LTE Data Rate :
5Mbps UL/10Mbps DL
SIM Card :
1.8/3.3 VEnvironmental Operating Temperature :
-40 ~ +85°C (without Backup Battery)
-10 ~ +60°C (with Backup Battery)
Humidity :
95%RH @ 50°C non-condensing
Shock & Vibration :
U.S. Military Standards 202G and 810F, SAE
J1455
EMC/EMI :
SAE J1113; FCC–Part 15B
RoHS : CompliantInput/OutputsDigital Inputs :
2 Digital inputs
Ignition Sense :
One dedicated wire for Ignition
Programmable Input :
One configurable input to a negative trigger
digital input or analog input
Digital Output :
Two digital outputs, open drain, 300mA
drive current max
Latched Digital O/P :
One digital output with internal latch circuit, open drain, 150mA drive max
1-Wire Solution :
1 wire interface (Driver ID)
BLE 4.2:
for Wireless Sensors
Status LEDs :
GPS, Cellular, PowerConnectors, SIM Card Access
Connector Type :
10 Pin Molex
Mini USB :
1 Micro USB (configuration/debug)
GPS Antenna: Internal
Cellular Antenna: Internal
SIM Card: Internal (4FF)On BoardCPU :
ARM Cortex M3
Flash Memory :
4Mbit (8000 records)
3D AccelerometerMountingTie Wrap, Velcro or adhesive
- + Applications
-
- + Accessories
